Use and maintenance of Haoze HZ-WT series horizontal hair removal machine
HZ-WT series horizontal hair removal machine is a horizontal roller mechanical hair removal machine designed and produced by Haoze Machinery for all kinds of poultry processing enterprises for hair removal.
Main technical parameters
Production capacity: 3000 pieces/hour
Motor power: 8KW
External dimension: 4200 * 1600 * 1200
Basic structure and working principle:
1. Rack part:
The four columns are composed of φ one hundred and eight × 8 seamless steel pipes are processed by precision turning. The geometric dimensions of the four fixed channel steels meet the national standard. The whole frame is firm and reliable, with good safety and stability.
2. Hair removal roller:
Rotary roller adopts φ one hundred and eight × 4. The seamless steel pipe is drilled after finishing. The rubber rod fixed on the roller is made of NBR, which is non-toxic and tasteless, has good flexibility and long service life, which not only ensures the depilation effect, but also reduces the defective rate.
3. Transmission system:
The total composition of the depilatory roller of the equipment is two rows, which are driven by a 4kw-4 vertical motor respectively. Through the triangle belt and chain drive, the upper and lower rows of depilatory rollers can rotate relatively to achieve the purpose of depilatory. The transmission bearing adopts high-quality 1207 self-aligning bearing, which is stable in operation and low in noise.
4. Regulating system:
Four adjusting screws can increase or reduce the distance between the upper and lower rows of depilatory roller assemblies to meet the depilatory needs of different sizes of ducks.
5. Outer cover:
Sprocket cover, motor cover and upper cover all adopt δ= 1.2 steel plate is bended and welded, firm, reliable and beautiful.
6. Spray system:
It is composed of a group of water pipes and pipe fittings. Spraying hot water with a certain temperature not only improves the hair removal effect, but also ensures the timely removal of feathers
Commissioning and maintenance:
1. Before the single machine test run, check whether the bolts at each part are loose and whether the lubricating parts have been filled with the specified lubricating grease. The test run can only be carried out after confirming that there are no problems in each part.
2. When the hair removal machine is working, the motor should be damp-proof and waterproof, and it is strictly forbidden to spray water on the motor when cleaning the equipment.
3. The following parts shall be inspected and treated frequently
A: Check whether the depilatory rubber rod is defective, and replace it in time if any.
B: Check whether the triangular belt of the motor is loose and tighten it in time.
C: Check whether there is water in the bearing seat and whether the bearing is damaged. Check and replace it in time, otherwise it is easy to cause adverse chain reaction.
Lubrication and maintenance
Each bearing seat and column sliding sleeve are equipped with grease fittings. It should be ensured that the bearing and sliding sleeve are lubricated regularly (once a week), and the adjusting screw and chain are lubricated with ordinary mechanical oil.